Water supply and drainage equipment research and development, production and sales

BPTD Pipeline Circulation Pump

BPTD single-stage pipeline circulating pumps, equipped with standard motor and mechanical seals, the structure of such products and similar types of products are less susceptible to the influence of impurities in the pumped liquid.
The product is designed for the top can be pulled out of the form of disassembly, it can be in the pipeline system does not affect the case of maintenance of the pump.
BPTD32-BPTD150 calibre products are of extended shaft structure, BPTD200-BPTD300 calibre products are of dismantling structure, the dismantling structure adopts assembled mechanical seals, and there is no need to dismantle the motor when replacing the mechanical seals.

Head:

12~85m

Capacity:

8~900m³/h

Liquid temperature:

＜40℃

Environment temperature:

-15℃~110℃

Elevation:

≤1000m

Maximum pressure:

≤12bar/16bar

Inquiry

download

BPTD管道泵

Write a Review

Product Information

BPL series single-stage single-suction upright centrifugal pump is a kind of high performance power-saving product designed and developed by the Company according to application requirement of customer, ISO international standard and up-to-date national standard after combined performance parameter of IS centrifugal pump and construction features of upright pipe pump.

The product applies to transportation of corrosion free cooling water and heating water used for air conditioner, heating, sanitary water, water treatment, cooling and refrigerating system, liquid circulation, water supply, pressurization and irrigation etc. volume of solid insoluble in medium should not exceed 0.1% of unit volume and granularity is smaller than 0.2mm.

It is designed and produced as different performance parameter product according to different transporting medium and temperature, such as BPR heat exchange pump, BPH chemical pump, BPY (YG) oil pump and BPHY permissible chemical pump etc.

advantage

Compact structure. These series pumps have an integrally Horizontal structure, beautiful appearance and small footprint.

Stable running, low noise, high concentricity of assembly. By the straight joint between the motor and the pump, the middle structure is made simplified, thus enhancing the running stability, making the impeller of a good balance of moving-resting, resulting in no vibration during running and improving the environment of use.

No leakage. A mechanical seal of antiseptic carbide alloy is used for the shaft sealing so as to get rid of the serious leakage of the fillings of centrifugal pumps and ensure the operating place clean and neat.

Convenient installation and maintenance. Service can be easily done without removing any pipeline because of the back-door structure.

Viewing from the inlet of the pump, the outlet of it can be mounted in one of the three ways, horizontally leftward, vertically upward and horizontally rightward.

Product Display

Model meaning

specifications

Number	Name
1	Pump Casing
2	Impeller
3	Pump Head
4	Mechanical Seal
5	Protection Plate
6	Coupling
7	Pump Shaft
8	Bleeder Assembly
9	“O”Ring
10	Bolted Plug
11	Pump Cover

size

Want to cooperate in depth?

E-MAIL US

bpa@shbangpu.com

SUPPORT 24/7

+86 -21-59741187

CONTACT PERSON:

Larry Liu